{"title":"Guitar Potentiometers (Pots)","description":"\u003cp\u003eEvery pot we carry, on one page. Use the filters to narrow by guitar, resistance, taper, shaft and thread length. Most of our pots are CTS, the brand nearly every American guitar maker has used since the 1940s, and we have most of them made to our own specs. Our ToneShaper CORE pots are the solder-free versions.\u003c\/p\u003e","products":[{"product_id":"cts-500k-500k-audio-pot-concentric","title":"CTS Pot, 500k \/ 500k Audio, Concentric","description":"\u003cul\u003e\n\u003cli\u003eBoth Sections: 500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (for Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.186\" Upper Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e.265\" Lower Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length\u003c\/li\u003e\n\u003cli\u003eHigh Torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. This concentric pot gives you two controls in the space of one. An example of its use would be as the volume control in a two-humbucker guitar, where you would have independent control of each pickup, but using only one control location.\u003c\/p\u003e\n\u003cp\u003eYou'll need special knobs for this pot, and we stock a couple that we buy from Fender that are made specifically for CTS pots (many concentric knob sets won't fit this pot, as they're made for imported pots with other shaft diameters).\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072499220725,"sku":"CT-4586-DR","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/al-ep-4586-000-optimized.jpg?v=1660318907"},{"product_id":"cts-250k-audio-pot-250-bushing-split-shaft","title":"CTS 250k Audio\/Log Pot, Split Shaft, Stratocaster","description":"\u003cul\u003e\n\u003cli\u003e250k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Stratocasters, fits many other guitars.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501678325,"sku":"CT-2178B-DR","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s2178b-optimized.jpg?v=1660575439"},{"product_id":"cts-250k-audio-pot-250-bushing-split-shaft-10-pack","title":"CTS 250k Audio\/Log Pot, Split Shaft, Stratocaster (10 Pack)","description":"\u003cul\u003e\n\u003cli\u003e250k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 10-pack of our CT-450S2178B pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Stratocasters, fits many other guitars.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501711093,"sku":"CT-450S2178B-10","price":52.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/toneshapers-copyright-image-ct-450s2178_group.jpg?v=1660583032"},{"product_id":"cts-250k-audio-pot-250-bushing-split-shaft-4-pack","title":"CTS 250k Audio\/Log Pot, Split Shaft, Stratocaster (4 Pack)","description":"\u003cul\u003e\n\u003cli\u003e250k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 4-pack of our CT-450S2178B pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Stratocasters, fits many other guitars.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501743861,"sku":"CT-450S2178B-4","price":25.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s2178b-4-optimized.jpg?v=1660158596"},{"product_id":"cts-250k-blender-pot-250-bushing-split-shaft","title":"CTS Blender Pot, Split Shaft, Top-Rout Guitars","description":"\u003cul\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis blender pot can be used to blend (combine) two pickups together, either a little or fully. Typically used in a Strat to allow the neck\/bridge pickups together, like a Tele. Either pickup is selected with the 5-way, then the blender control blends in the other pickup. Because it's not acting like a switch (either on or off), you can get many subtle tonal shadings that would not be possible any other way.\u003c\/p\u003e\n\u003cp\u003eThis pot can also be used as a no-load tone pot. Fender's no-load pot behaves in exactly the same way, except that Fender's pot clicks into a detent in the full-clockwise position. Our pot does not have a detent, it utilizes CTS' low-torque design (making it easier to turn, like most Fender pots), which doesn't support detenting.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501776629,"sku":"CT-2179A-DR","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s2179a-optimized.jpg?v=1660583649"},{"product_id":"cts-250k-blender-pot-250-bushing-split-shaft-10-pack","title":"CTS Blender Pot, Split Shaft, Top-Rout Guitars (10 Pack)","description":"\u003cul\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 10-pack of our CT-450S2179A pots.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis blender pot can be used to blend (combine) two pickups together, either a little or fully. Typically used in a Strat to allow the neck\/bridge pickups together, like a Tele. Either pickup is selected with the 5-way, then the blender control blends in the other pickup. Because it's not acting like a switch (either on or off), you can get many subtle tonal shadings that would not be possible any other way.\u003c\/p\u003e\n\u003cp\u003eThis pot can also be used as a no-load tone pot. Fender's no-load pot behaves in exactly the same way, except that Fender's pot clicks into a detent in the full-clockwise position. Our pot does not have a detent, it utilizes CTS' low-torque design (making it easier to turn, like most Fender pots), which doesn't support detenting.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501809397,"sku":"CT-450S2179A-10","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/toneshapers-copyright-image-ct-450s2178_group_1.jpg?v=1660583938"},{"product_id":"cts-250k-blender-pot-250-bushing-split-shaft-4-pack","title":"CTS Blender Pot, Split Shaft, Top-Rout Guitars (4 Pack)","description":"\u003cul\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 4-pack of our CT-450S2179A pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis blender pot can be used to blend (combine) two pickups together, either a little or fully. Typically used in a Strat to allow the neck\/bridge pickups together, like a Tele. Either pickup is selected with the 5-way, then the blender control blends in the other pickup. Because it's not acting like a switch (either on or off), you can get many subtle tonal shadings that would not be possible any other way.\u003c\/p\u003e\n\u003cp\u003eThis pot can also be used as a no-load tone pot. Fender's no-load pot behaves in exactly the same way, except that Fender's pot clicks into a detent in the full-clockwise position. Our pot does not have a detent, it utilizes CTS' low-torque design (making it easier to turn, like most Fender pots), which doesn't support detenting.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501842165,"sku":"CT-450S2179A-4","price":28.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s2179a-4-optimized.jpg?v=1660584067"},{"product_id":"cts-250k-audio-pot-250-bushing-solid-shaft","title":"CTS 250k Audio\/Log Pot, Solid Shaft, Telecaster","description":"\u003cul\u003e\n\u003cli\u003e250k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Telecasters, fits many other guitars.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501874933,"sku":"CT-2587B-DR","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s2587b-optimized.jpg?v=1660584168"},{"product_id":"cts-250k-audio-pot-250-bushing-solid-shaft-10-pack","title":"CTS 250k Audio\/Log Pot, Solid Shaft, Telecaster (10 Pack)","description":"\u003cul\u003e\n\u003cli\u003e250k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 10-pack of our CT-450S2587B pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Telecasters, fits many other guitars.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501907701,"sku":"CT-450S2587B-10","price":52.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/toneshapers-copyright-image-ct-450s2587_group.jpg?v=1660584261"},{"product_id":"cts-250k-audio-pot-250-bushing-solid-shaft-4-pack","title":"CTS 250k Audio\/Log Pot, Solid Shaft, Telecaster (4 Pack)","description":"\u003cul\u003e\n\u003cli\u003e250k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 4-pack of our CT-450S2587B pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for Telecasters, fits many other guitars.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501940469,"sku":"CT-450S2587B-4","price":25.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s2587b-4-optimized.jpg?v=1660584358"},{"product_id":"cts-500k-audio-pot-500-bushing-split-shaft","title":"CTS 500k Audio\/Log Pot, Split Shaft, Rear-Routed Guitars","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.500\" Bushing Length (Rear-Routed Guitars)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAppropriate for most Gibsons, and many other guitars.\u003c\/p\u003e\n\u003cp\u003eThis particular pot is designed for rear-rout applications, where the pot bushing needs to be long enough to pass through the guitar's top while still allowing enough threaded length to use the appropriate nuts and washers, (which are included). Most rear-routed guitars are designed with a 1\/4\" or 6mm top thickness, and the longer 1\/2\" threaded bushing on these pots makes them perfect for these rear-rout applications.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072501973237,"sku":"CT-3507-DR","price":9.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s3507-optimized.jpg?v=1660584454"},{"product_id":"cts-500k-audio-pot-500-bushing-split-shaft-10-pack","title":"CTS 500k Audio\/Log Pot, Split Shaft, Rear-Routed Guitars (10 Pack)","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.500\" Bushing Length (Rear-Routed Guitars)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 10-pack of our CT-450S3507 pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAppropriate for most Gibsons, and many other guitars.\u003c\/p\u003e\n\u003cp\u003eThis particular pot is designed for rear-rout applications, where the pot bushing needs to be long enough to pass through the guitar's top while still allowing enough threaded length to use the appropriate nuts and washers, (which are included). Most rear-routed guitars are designed with a 1\/4\" or 6mm top thickness, and the longer 1\/2\" threaded bushing on these pots makes them perfect for these rear-rout applications.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502006005,"sku":"CT-450S3507-10","price":69.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/toneshapers-copyright-image-ct-450s3507_group.jpg?v=1660584617"},{"product_id":"cts-500k-audio-pot-500-bushing-split-shaft-4-pack","title":"CTS 500k Audio\/Log Pot, Split Shaft, Rear-Routed Guitars (4 Pack)","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.500\" Bushing Length (Rear-Routed Guitars)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 4-pack of our CT-450S3507 pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAppropriate for most Gibsons, and many other guitars.\u003c\/p\u003e\n\u003cp\u003eThis particular pot is designed for rear-rout applications, where the pot bushing needs to be long enough to pass through the guitar's top while still allowing enough threaded length to use the appropriate nuts and washers, (which are included). Most rear-routed guitars are designed with a 1\/4\" or 6mm top thickness, and the longer 1\/2\" threaded bushing on these pots makes them perfect for these rear-rout applications.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502038773,"sku":"CT-450S3507-4","price":33.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s3507-4-optimized.jpg?v=1660584825"},{"product_id":"cts-500k-audio-pot-250-bushing-split-shaft","title":"CTS 500k Audio\/Log Pot, Split Shaft, Top-Routed Guitars","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese pots are perfect for Stratocasters, if 500k pots are desired.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502235381,"sku":"CT-3928-DR","price":8.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s3928-optimized.jpg?v=1660585113"},{"product_id":"cts-500k-audio-pot-250-bushing-split-shaft-10-pack","title":"CTS 500k Audio\/Log Pot, Split Shaft, Top-Routed Guitars (10 Pack)","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 10-pack of our CT-450S3928 pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese pots are perfect for Stratocasters, if 500k pots are desired.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502268149,"sku":"CT-450S3928-10","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/toneshapers-copyright-image-ct-450s3928_group.jpg?v=1660585507"},{"product_id":"cts-500k-audio-pot-250-bushing-split-shaft-4-pack","title":"CTS 500k Audio\/Log Pot, Split Shaft, Top-Routed Guitars (4 Pack)","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 4-pack of our CT-450S3928 pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese pots are perfect for Stratocasters, if 500k pots are desired.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502300917,"sku":"CT-450S3928-4","price":28.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s3928-4-optimized.jpg?v=1660585644"},{"product_id":"cts-500k-audio-pot-250-bushing-solid-shaft","title":"CTS 500k Audio\/Log Pot, Solid Shaft, Top-Routed Guitars","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese pots are perfect for Telecasters, if 500k pots are desired.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502366453,"sku":"CT-3929-DR","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s3929-optimized.jpg?v=1660586070"},{"product_id":"cts-500k-audio-pot-250-bushing-solid-shaft-10-pack","title":"CTS 500k Audio\/Log Pot, Solid Shaft, Top-Routed Guitars (10 Pack)","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 10-pack of our CT-450S3929 pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese pots are perfect for Telecasters, if 500k pots are desired.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502399221,"sku":"CT-450S3929-10","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/toneshapers-copyright-image-ct-450s3929_group.jpg?v=1660589721"},{"product_id":"cts-500k-audio-pot-250-bushing-solid-shaft-4-pack","title":"CTS 500k Audio\/Log Pot, Solid Shaft, Top-Routed Guitars (4 Pack)","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 4-pack of our CT-450S3929 pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese pots are perfect for Telecasters, if 500k pots are desired.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s. We order most of our pots directly from CTS and have them made to our specs.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502431989,"sku":"CT-450S3929-4","price":28.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s3929-4-optimized.jpg?v=1660590300"},{"product_id":"cts-pot-500k-audio-push-pull-split-shaft","title":"CTS 500k Audio\/Log Push-Pull Pot, Solder-Free","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eBuy more and save on these PP01 pots!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolder free!\u003c\/li\u003e\n\u003cli\u003e500k audio taper (logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit, knurled shaft (24 teeth), for push-on knobs\u003c\/li\u003e\n\u003cli\u003eIncluded sleeve turns split-shaft pot into 1\/4\" solid-shaft for setscrew knobs\u003c\/li\u003e\n\u003cli\u003e3\/8-32 SAE bushing thread\u003c\/li\u003e\n\u003cli\u003e.500\" bushing length, long enough for rear-routed guitars\u003c\/li\u003e\n\u003cli\u003eScrewdriver included\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS, and these CTS push\/pull pots combine that great CTS quality with the convenience of a built-in DPDT switch that can be used for many things: coil splitting, phase reverse, series\/parallel, and more.\u003c\/p\u003e\n\u003ch5\u003eBenefits\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eOur Solderless Version Solves a Problem\u003c\/strong\u003e\u003cbr\u003eWhen we first saw the CTS DPDT push\/pull pots we knew they'd be somewhat daunting to solder to, as the wire connections for the switch are made via holes in the circuit board. You have to stick the wire into the hole, try to hold it in place without wiggling it, then solder it to the circuit board. There's not much room, and once a couple of wires are in place it gets pretty crowded. The three pot contacts are straightforward and easy to solder to, but the six holes for the switch contacts are anything but, unless you're an experienced solderer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ToneShaper Solution\u003cbr\u003e\u003c\/strong\u003eOur pots use screw-down terminal blocks: insert the wire, tighten the screw, done! Easy peasy, and we even provide the screwdriver. The terminal block has nine slots: three for the pot, and six for the switch, so no soldering is required at all. Pay a few bucks extra and save yourself a bunch of hassle!\u003c\/p\u003e\n\u003ch5\u003eModels\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eOption One: PP01 (500k)\u003cbr\u003e\u003c\/strong\u003eWe offer two versions of our push\/pull. You're looking at PP01, which is a straight-ahead 500k, DPDT push\/pull - it does exactly what any DPDT push\/pull pot does, nothing more and nothing less, but it's fully solderless.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption Two: PP02 (Use as 500k or 250k)\u003c\/strong\u003e\u003cbr\u003eOur PP02 pot\u003cmeta charset=\"utf-8\"\u003e - also available on our website - is just like our PP01 but with several additional features built-in, and you can enable or defeat these options using the mini-DIP switches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngage a resistor to drop the pot loading from 500k to 250k\u003c\/li\u003e\n\u003cli\u003eBuilt-in treble bleed may be engaged (when used as a volume control)\u003c\/li\u003e\n\u003cli\u003eChoose from seven built-in capacitor values (when used as a tone control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePot\u003c\/li\u003e\n\u003cli\u003e6\" black and white wires - used to make small jumpers where needed so that multiple connections can be made to a single slot\u003c\/li\u003e\n\u003cli\u003eSmall screwdriver to tighten terminal screws\u003c\/li\u003e\n\u003cli\u003eHardware pack can be used in various ways to accommodate various mounting scenarios (top rout, rear rout, various top thicknesses, etc.)\u003c\/li\u003e\n\u003cli\u003eBrass sleeve may be used to turn the pot into a quasi solid-shaft pot, for use with setscrew knobs (1\/4\" bore required, not 6mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CTS","offers":[{"title":"Single","offer_id":46776830460149,"sku":"CT-PP01-1","price":19.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":46776830492917,"sku":"CT-PP01-2","price":35.99,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":46776830525685,"sku":"CT-PP01-3","price":53.99,"currency_code":"USD","in_stock":true},{"title":"4-Pack","offer_id":46776830558453,"sku":"CT-PP01-4","price":71.99,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":46776830591221,"sku":"CT-PP01-5","price":84.99,"currency_code":"USD","in_stock":true},{"title":"6-Pack","offer_id":46776830623989,"sku":"CT-PP01-6","price":101.99,"currency_code":"USD","in_stock":true},{"title":"7-Pack","offer_id":46776830656757,"sku":"CT-PP01-7","price":118.99,"currency_code":"USD","in_stock":true},{"title":"8-Pack","offer_id":46776830689525,"sku":"CT-PP01-8","price":127.99,"currency_code":"USD","in_stock":true},{"title":"9-Pack","offer_id":46776830722293,"sku":"CT-PP01-9","price":143.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":46776830755061,"sku":"CT-PP01-10","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/files\/01-CT-PP01-DR-Complete.jpg?v=1760703072"},{"product_id":"cts-pot-500-250k-audio-push-pull-switched-split-shaft","title":"CTS 500k\/250k Audio\/Log Push-Pull Pot, Solder-Free","description":"\u003cp\u003e\u003cstrong\u003eBuy more and save on these PP02 pots!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolder free!\u003c\/li\u003e\n\u003cli\u003e500k\/250k (selectable) audio taper\u003c\/li\u003e\n\u003cli\u003eSplit, knurled shaft (24 teeth), for push-on knobs\u003c\/li\u003e\n\u003cli\u003eIncluded sleeve turns split-shaft pot into 1\/4\" solid-shaft for setscrew knobs\u003c\/li\u003e\n\u003cli\u003e3\/8-32 \u003cmeta charset=\"utf-8\"\u003eSAE bushing thread\u003c\/li\u003e\n\u003cli\u003e.500\" bushing length, long enough for rear-routed guitars\u003c\/li\u003e\n\u003cli\u003eScrewdriver included\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS, and these CTS push\/pull pots combine that great CTS quality with the convenience of a built-in DPDT switch that can be used for many things: coil splitting, phase reverse, series\/parallel, and more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDOES NOT FIT IN TELE ROUT\u003cbr\u003e\u003c\/strong\u003eThe circuit board hanging out on one side prevents this pot from fitting in a standard Telecaster control cavity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Solderless Version Solves a Problem\u003c\/strong\u003e\u003cbr\u003eWhen we first saw the CTS DPDT push\/pull pots we knew they'd be somewhat daunting to solder to, as the wire connections for the switch are made via holes in the circuit board. You have to stick the wire into the hole, try to hold it in place without wiggling it, then solder it to the circuit board. There's not much room, and once a couple of wires are in place it gets pretty crowded. The three pot contacts are straightforward and easy to solder to, but the six holes for the switch contacts are anything but, unless you're an experienced solderer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ToneShaper Solution\u003cbr\u003e\u003c\/strong\u003eOur pots use screw-down terminal blocks: insert the wire, tighten the screw, done! Easy peasy, and we even provide the screwdriver. The terminal block has nine slots: three for the pot, and six for the switch, so no soldering is required at all. Pay a few bucks extra and save yourself a bunch of hassle!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption One: PP01 (500k)\u003cbr\u003e\u003c\/strong\u003eWe offer two versions of our push\/pull. PP01 is just a straight-ahead push\/pull, it does exactly what any push\/pull pot does, nothing more and nothing less, but it's fully solderless.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption Two: PP02 (Use as 500k or 250k)\u003c\/strong\u003e\u003cbr\u003eOur PP02 pot is just like our PP01 but with several additional features built-in, and you can enable or defeat these options using the mini-DIP switches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngage a resistor to drop the pot loading from 500k to 250k\u003c\/li\u003e\n\u003cli\u003eBuilt-in treble bleed may be engaged (when used as a volume control)\u003c\/li\u003e\n\u003cli\u003eChoose from seven built-in capacitor values (when used as a tone control)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CTS","offers":[{"title":"Single","offer_id":46776756142325,"sku":"CT-PP02-1","price":25.99,"currency_code":"USD","in_stock":true},{"title":"2-Pack","offer_id":46776756175093,"sku":"CT-PP02-2","price":46.79,"currency_code":"USD","in_stock":true},{"title":"3-Pack","offer_id":46776756207861,"sku":"CT-PP02-3","price":69.99,"currency_code":"USD","in_stock":true},{"title":"4-Pack","offer_id":46776756240629,"sku":"CT-PP02-4","price":93.59,"currency_code":"USD","in_stock":true},{"title":"5-Pack","offer_id":46776756273397,"sku":"CT-PP02-5","price":110.49,"currency_code":"USD","in_stock":true},{"title":"6-Pack","offer_id":46776756306165,"sku":"CT-PP02-6","price":132.59,"currency_code":"USD","in_stock":true},{"title":"7-Pack","offer_id":46776756338933,"sku":"CT-PP02-7","price":154.69,"currency_code":"USD","in_stock":true},{"title":"8-Pack","offer_id":46776756371701,"sku":"CT-PP02-8","price":166.99,"currency_code":"USD","in_stock":true},{"title":"9-Pack","offer_id":46776756404469,"sku":"CT-PP02-9","price":186.99,"currency_code":"USD","in_stock":true},{"title":"10-Pack","offer_id":46776756437237,"sku":"CT-PP02-10","price":194.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s4102-pp02.jpg?v=1660591127"},{"product_id":"cts-500k-audio-pot-500-bushing-solid-shaft","title":"CTS 500k Audio\/Log Pot, Solid Shaft, Rear-Routed Guitars","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.500\" Bushing Length (Rear-Routed Guitars)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s.\u003c\/p\u003e\n\u003cp\u003eThis particular pot is designed for rear-rout applications, where the pot bushing needs to be long enough to pass through the guitar's top while still allowing enough threaded length to use the appropriate nuts and washers, (which are included). Most rear-routed guitars are designed with a 1\/4\" or 6mm top thickness, and the longer 1\/2\" threaded bushing on these pots makes them perfect for these rear-rout applications.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502661365,"sku":"CT-4255-DR","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s4255-500k-audio-pot-cts-.500-bushing-solid-shaft-2000_1.jpg?v=1660591570"},{"product_id":"cts-500k-audio-pot-500-bushing-solid-shaft-10","title":"CTS 500k Audio\/Log Pot, Solid Shaft, Rear-Routed Guitars (10 Pack)","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.500\" Bushing Length (Rear-Routed Guitars)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 10-pack of our CT-450S3929 pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s.\u003c\/p\u003e\n\u003cp\u003eThis particular pot is designed for rear-rout applications, where the pot bushing needs to be long enough to pass through the guitar's top while still allowing enough threaded length to use the appropriate nuts and washers, (which are included). Most rear-routed guitars are designed with a 1\/4\" or 6mm top thickness, and the longer 1\/2\" threaded bushing on these pots makes them perfect for these rear-rout applications.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502694133,"sku":"CT-450S4255-10","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s4255-10-500k-audio-pot-cts-.500-bushing-solid-shaft-2000.jpg?v=1660591692"},{"product_id":"cts-500k-audio-pot-500-bushing-solid-shaft-4","title":"CTS 500k Audio\/Log Pot, Solid Shaft, Rear-Routed Guitars (4 Pack)","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.500\" Bushing Length (Rear-Routed Guitars)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a 4-pack of our CT-450S3929 pots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS - this is the brand that pretty much every American guitar company has used since the 1940s.\u003c\/p\u003e\n\u003cp\u003eThis particular pot is designed for rear-rout applications, where the pot bushing needs to be long enough to pass through the guitar's top while still allowing enough threaded length to use the appropriate nuts and washers, (which are included). Most rear-routed guitars are designed with a 1\/4\" or 6mm top thickness, and the longer 1\/2\" threaded bushing on these pots makes them perfect for these rear-rout applications.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502726901,"sku":"CT-450S4255-4","price":28.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-450s4255-4-500k-audio-pot-cts-.500-bushing-solid-shaft-2000_1.jpg?v=1660591815"},{"product_id":"cts-pot-pack-for-gibson-500k-audio-2-volume-2-push-pull-pp02","title":"CTS Pot Pack for Gibson, 500K Audio, 2 Volume, 2 Push\/Pull (PP02)","description":"\u003cp\u003e\u003cstrong\u003eIncludes (2) Standard Pots\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e500k audio taper (logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit, knurled shaft (24 teeth), for push-on knobs\u003c\/li\u003e\n\u003cli\u003e3\/8-32 \u003cmeta charset=\"utf-8\"\u003eSAE bushing thread\u003c\/li\u003e\n\u003cli\u003e.500\" bushing length, long enough for rear-routed guitars\u003c\/li\u003e\n\u003cli\u003eLow torque\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes (2) PP02 Push\/Pull Pots\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolder free, just insert a wire and tighten the screw!\u003c\/li\u003e\n\u003cli\u003e500k\/250k audio taper (logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit, knurled shaft (24 teeth), for push-on knobs\u003c\/li\u003e\n\u003cli\u003e3\/8-32 \u003cmeta charset=\"utf-8\"\u003eSAE bushing thread\u003c\/li\u003e\n\u003cli\u003e.500\" bushing length, long enough for rear-routed guitars\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003eDoes not fit\u003c\/strong\u003e\u003c\/em\u003e very thin guitars, like SGs\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003eScrewdriver included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eToneShaper Pot Packs give you the top-quality components you need to wire your guitar, adding tonal flexibility with the most versatile and highest-quality parts available.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCool Switching Options = Tonal Flexibility\u003c\/strong\u003e\u003cbr\u003eThis Pot Pack for Les Paul style guitars gives you two standard pots and two push\/pulls, plus documentation for wiring in one of three unique ways that will add lots of tonal flexibility to your guitar. Please be aware that this kit is optimized for guitars with 4-conductor pickups - pickups with vintage-style braided leads will not allow you to utilize the flexibility offered by these pots.\u003c\/p\u003e\n\u003cp\u003eAll four pots have a 1\/2\" bushing length, which we've found is the perfect length for use in rear-routed guitars. We find the pot lengths offered by other merchants to be either too short (3\/8\") or longer than needed (3\/4\"). Since most guitar makers shoot for a top thickness of 1\/4\" at the control locations, 1\/2\" bushings allow you to install the pots with the appropriate lockwashers on the inside of the guitar, while being long enough that you can get a flat washer and a nut on the outside of the guitar.\u003c\/p\u003e\n\u003cp\u003eThe best guitar pots we're aware of are made by CTS, and these CTS push\/pull pots combine that great CTS quality with the convenience of a built-in DPDT switch that can be used for many things: coil splitting, phase reverse, series\/parallel, and more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Solderless Version Solves a Problem\u003c\/strong\u003e\u003cbr\u003eWhen we first saw the CTS DPDT push\/pull pots we knew they'd be somewhat daunting to solder to, as the wire connections for the switch are made via holes in the circuit board. You have to stick the wire into the hole, try to hold it in place without wiggling it, then solder it to the circuit board. There's not much room, and once a couple of wires are in place it gets pretty crowded. The three pot contacts are straightforward and easy to solder to, but the six holes for the switch contacts are anything but, unless you're an experienced solderer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe ToneShaper Solution\u003cbr\u003e\u003c\/strong\u003eOur pots use screw-down terminal blocks: insert the wire, tighten the screw, done! Easy peasy, and we even provide the screwdriver. The terminal block has nine slots: three for the pot, and six for the switch, so no soldering is required at all. Pay a few bucks extra and save yourself a bunch of hassle! \u003cmeta charset=\"utf-8\"\u003eWe offer two versions of our push\/pull:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption One: PP01 (500k)\u003cbr\u003e\u003c\/strong\u003ePP01 is just a straight-ahead push\/pull, it does exactly what any push\/pull pot does, nothing more and nothing less, but it's fully solderless.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOption Two: PP02\u003cmeta charset=\"utf-8\"\u003e (\u003cspan style=\"text-decoration: underline;\"\u003eINCLUDED WITH THIS KIT\u003c\/span\u003e) (Use as 500k or 250k)\u003c\/strong\u003e\u003cbr\u003eOur PP02 pot is just like our PP01 but with several additional features built-in, and you can enable or defeat these options using the mini-DIP switches:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngage a resistor to drop the pot loading from 500k to 250k\u003c\/li\u003e\n\u003cli\u003eBuilt-in treble bleed may be engaged (when used as a volume control)\u003c\/li\u003e\n\u003cli\u003eChoose from seven built-in capacitor values (when used as a tone control)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502825205,"sku":"CT-GPACK-2V2P2","price":56.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-gpack-2v2p2.jpg?v=1660592194"},{"product_id":"cts-pot-pack-for-gibson-500k-audio-4-volume","title":"CTS Pot Pack for Gibson, 500K Audio, 2 Volume, 2 Tone","description":"\u003cul\u003e\n\u003cli\u003e500k audio taper (logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit, knurled shaft (24 teeth), for push-on knobs\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS bushing thread\u003c\/li\u003e\n\u003cli\u003e.500\" bushing length, long enough for rear-routed guitars\u003c\/li\u003e\n\u003cli\u003eLow torque (dimpled back - turns easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSet of four CTS pots for Gibson-style guitars, appropriate in almost any Les Paul, ES-335, SG or similar guitar. 500k audio, 24-tooth knurl. Four standard pots with .5\" bushing lengths, for rear-routed applications. Long enough to get through a guitar top, but still shallow enough to fit in an ES-335 or SG.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Ones Are Volume and Which Tone?\u003c\/strong\u003e\u003cbr\u003eThe four pots are identical, use any two for volume and any two for tone. Almost all Gibsons made since 1952 have used four 500k audio-taper pots - the same pots are used for both volume and tone. There have been exceptions, Gibson has experimented with 300k pots, linear taper pots, etc. But the majority of Les Pauls, ES-335s, and SGs have come with four 500k audio-taper pots, like the ones in this kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre These Pots \u003cspan style=\"text-decoration: underline;\"\u003eLong\u003c\/span\u003e or \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eShort\u003c\/span\u003e?\u003c\/strong\u003e\u003cbr\u003eThese names are thrown around indiscriminately, they are not definitive. Common bushing lengths for guitar pots are 1\/4\", 3\/8\", 1\/2\", 3\/4\". The pots in our kit have 1\/2\", not 3\/4\" bushings. Les Pauls originally used 3\/8\" pots, but Gibson started using 3\/4\" in the late 1970s for a couple of reasons, primarily for manufacturing expediency. If you have a Les Paul that has the pots mounted on a metal plate, and \u003cem\u003eif you want to keep the plate in there\u003c\/em\u003e (for most Les Paul owners it serves no useful purpose), then our pots are not long enough, you'll need 3\/4\" pots.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072502857973,"sku":"CT-GPACK-2V2T","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ct-gpack-2v2t.jpg?v=1660592691"},{"product_id":"cts-1-meg-audio-pot-250-bushing-solid-shaft","title":"CTS Pot, 1M Audio, Solid Shaft","description":"\u003cul\u003e\n\u003cli\u003e1 Meg Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the pot used for both the master volume and master tone controls in Fender's USA Vintage Reissue Jaguars. We buy these pots directly from Fender, they're the right part for this application if vintage wiring is desired.\u003c\/p\u003e\n\u003cp\u003eBe advised: These pots have 1\/4\" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. Most imported guitars that have setscrew knobs come with metric pots with 6mm shafts - and accordingly, they come with knobs with 6mm holes - and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1\/4\".\u003c\/p\u003e\n\u003cp\u003eWhile this might seem like no big deal, in practice it's not something the average consumer will find trivial. A drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. Unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs. All of the Fender and Callaham setscrew knobs we sell will work, they all have 1\/4\" bores and are designed for CTS pots with solid shafts.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072503152885,"sku":"CT-9066-DR","price":6.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/fe-001-9066-049-optimized.jpg?v=1660593398"},{"product_id":"cts-1-meg-audio-pot-250-bushing-split-shaft","title":"CTS Pot, 1M Audio, Split Shaft","description":"\u003cul\u003e\n\u003cli\u003e1 Meg Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the pot used for the master tone control in Fender's USA Vintage Reissue Jazzmaster. We buy these pots directly from Fender, they're the right part for this application if vintage wiring is desired.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072503251189,"sku":"CT-4032-DR","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/fe-005-4032-049-optimized.jpg?v=1660593622"},{"product_id":"cts-1-meg-linear-pot-250-bushing-split-shaft","title":"CTS Pot, 1M Linear, Split Shaft","description":"\u003cul\u003e\n\u003cli\u003e1 Meg Linear Taper\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the pot used for the master volume control in Fender's USA Vintage Reissue Jazzmaster. We buy these pots directly from Fender, they're the right part for this application if vintage wiring is desired.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072503283957,"sku":"CT-4453-DR","price":14.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/fe-005-4453-000-optimized.jpg?v=1660593736"},{"product_id":"cts-1-meg-linear-mini-pot","title":"CTS 1 Meg Linear Pot, Mini, for Jazzmaster\/Jaguar","description":"\u003cul\u003e\n\u003cli\u003e1 Meg Linear Taper\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Roller Knobs)\u003c\/li\u003e\n\u003cli\u003e.156\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e1\/4-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length\u003c\/li\u003e\n\u003cli\u003eMini-Pot\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth Fender's Jazzmaster and Jaguar were originally wired with a separate circuit for the neck pickup, which provided a volume and tone control for the neck pickup that was separate from the master volume and tone controls. This neck pickup circuit was controlled using roller knobs that are attached to mini pots.\u003c\/p\u003e\n\u003cp\u003eThis is the mini pot used for volume control, it's the right part for both the Jazzmaster and Jaguar when vintage wiring is desired.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072503382261,"sku":"CT-4457-DR","price":7.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/fe-005-4457-049-optimized.jpg?v=1660594260"},{"product_id":"cts-50k-linear-mini-pot","title":"CTS 50k Linear Pot, Mini, for Jazzmaster\/Jaguar","description":"\u003cul\u003e\n\u003cli\u003e50k Linear Taper\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Roller Knobs)\u003c\/li\u003e\n\u003cli\u003e.156\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e1\/4-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length\u003c\/li\u003e\n\u003cli\u003eMini-Pot\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWe sell these pots individually, the image shows two so that you can see more detail.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth Fender's Jazzmaster and Jaguar were originally wired with a separate circuit for the neck pickup, which provided a volume and tone control for the neck pickup that was separate from the master volume and tone controls. This neck pickup circuit was controlled using roller knobs that are attached to mini pots.\u003c\/p\u003e\n\u003cp\u003eThis is the mini pot used for tone control, it's the right part for both the Jazzmaster and Jaguar when vintage wiring is desired.\u003c\/p\u003e","brand":"CTS","offers":[{"title":"Default Title","offer_id":43072503415029,"sku":"CT-4458-DR","price":7.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/fe-005-4458-049-optimized.jpg?v=1660594364"},{"product_id":"toneshapers-core-pot-250k-audio-short-split-shaft","title":"ToneShaper CORE Pot, 250K Audio, Short, Split Shaft","description":"\u003cul\u003e\n\u003cli\u003e250k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur CORE pots are the only pots of their type. Based on our conventional top-quality CTS pots, we've made our CORE pots solder-free. Simply insert a wire into the slot and tighten with the included screwdriver. Voilà! Connection made.\u003c\/p\u003e\n\u003cp\u003eThis allows the pot to be used in any wiring scheme where a conventional pot would be used. The screw-down terminal block that holds the wires makes for a secure connection that is tonally identical to soldered pots (believe us when we say that the electrons are just as happy to flow across a mechanical connection as a soldered one).\u003c\/p\u003e\n\u003cp\u003eYou'll have our CORE pots installed and connected in minutes instead of hours, and you'll never again have that messy solder all over the back of your pots. Use them over and over!\u003c\/p\u003e\n\u003cp\u003eAnd check out our full complement of accessory items for use with these pots, including tremolo claws, jacks, tone capacitors, tunable treble bleed networks, and wired ground lugs. All have stranded leads pre-attached to make your project truly solder free!\u003c\/p\u003e\n\u003cp\u003eThe green terminal block is designed for stranded wire rather than solid wire, so thick or stiff capacitor legs, treble bleed networks and so forth are not suitable (did we mention we have a full line of accessories?)\u003c\/p\u003e\n\u003cp\u003eOn the other hand, the ground lug on the back of the pot is substantial, and is well suited for heavier ground wires like those found in some Gibson guitars, as well as any other ground connections you need to make.\u003c\/p\u003e\n\u003cp\u003eSo put the soldering iron away, and stop breathing those fumes. And don't even think about paying a tech. Our CORE pots will have your project completed in half the time or less!\u003c\/p\u003e","brand":"ToneShaper","offers":[{"title":"Default Title","offer_id":43072507609333,"sku":"TS-CORE-2178","price":14.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ts-core-2178_c_-toneshaper-core-pot-250k-audio-short-split-shaft-2000.jpg?v=1660680787"},{"product_id":"toneshapers-core-pot-250k-blender-short-split-shaft","title":"ToneShaper CORE Pot, 250K Blender, Short, Split Shaft","description":"\u003cul\u003e\n\u003cli\u003eSplit-Shaft (Push-On Knobs)\u003c\/li\u003e\n\u003cli\u003eKnurled Shaft - 24 Teeth\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis blender pot is designed to blend two pickups together, combining them completely or partly. It's typically used in a Strat to allow you to combine the neck + bridge pickups - or have all three pickups on - with lots of subtle tonal shading. This is in addition to the normal 5 switch positions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eThis pot cannot be used as a volume control.\u003c\/strong\u003e\u003c\/em\u003e It can however be used as a tone control, in which case it will function as a no-load pot.\u003c\/p\u003e\n\u003cp\u003eOur CORE pots are the only pots of their type. Based on our conventional top-quality CTS pots, we've made our CORE pots solder-free. Simply insert a wire into the slot and tighten with the included screwdriver. Voilà! Connection made.\u003c\/p\u003e\n\u003cp\u003eThis allows the pot to be used in any wiring scheme where a conventional pot would be used. The screw-down terminal block that holds the wires makes for a secure connection that is tonally identical to soldered pots (believe us when we say that the electrons are just as happy to flow across a mechanical connection as a soldered one).\u003c\/p\u003e\n\u003cp\u003eYou'll have our CORE pots installed and connected in minutes instead of hours, and you'll never again have that messy solder all over the back of your pots. Use them over and over!\u003c\/p\u003e\n\u003cp\u003eAnd check out our full complement of accessory items for use with these pots, including tremolo claws, jacks, tone capacitors, tunable treble bleed networks, and wired ground lugs. All have stranded leads pre-attached to make your project truly solder free!\u003c\/p\u003e\n\u003cp\u003eThe green terminal block is designed for stranded wire rather than solid wire, so thick or stiff capacitor legs, treble bleed networks and so forth are not suitable (did we mention we have a full line of accessories?)\u003c\/p\u003e\n\u003cp\u003eOn the other hand, the ground lug on the back of the pot is substantial, and is well suited for heavier ground wires like those found in some Gibson guitars, as well as any other ground connections you need to make.\u003c\/p\u003e\n\u003cp\u003eSo put the soldering iron away, and stop breathing those fumes. And don't even think about paying a tech. Our CORE pots will have your project completed in half the time or less!\u003c\/p\u003e","brand":"ToneShaper","offers":[{"title":"Default Title","offer_id":43072507642101,"sku":"TS-CORE-2179","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ts-core-2178_c_-toneshaper-core-pot-250k-audio-short-split-shaft-2000_1.jpg?v=1660682154"},{"product_id":"toneshapers-core-pot-250k-audio-short-solid-shaft","title":"ToneShaper CORE Pot, 250K Audio, Short, Solid Shaft","description":"\u003cul\u003e\n\u003cli\u003e250k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur CORE pots are the only pots of their type. Based on our conventional top-quality CTS pots, we've made our CORE pots solder-free. Simply insert a wire into the slot and tighten with the included screwdriver. Voilà! Connection made.\u003c\/p\u003e\n\u003cp\u003eThis allows the pot to be used in any wiring scheme where a conventional pot would be used. The screw-down terminal block that holds the wires makes for a secure connection that is tonally identical to soldered pots (believe us when we say that the electrons are just as happy to flow across a mechanical connection as a soldered one).\u003c\/p\u003e\n\u003cp\u003eYou'll have our CORE pots installed and connected in minutes instead of hours, and you'll never again have that messy solder all over the back of your pots. Use them over and over!\u003c\/p\u003e\n\u003cp\u003eAnd check out our full complement of accessory items for use with these pots, including tremolo claws, jacks, tone capacitors, tunable treble bleed networks, and wired ground lugs. All have stranded leads pre-attached to make your project truly solder free!\u003c\/p\u003e\n\u003cp\u003eThe green terminal block is designed for stranded wire rather than solid wire, so thick or stiff capacitor legs, treble bleed networks and so forth are not suitable (did we mention we have a full line of accessories?)\u003c\/p\u003e\n\u003cp\u003eOn the other hand, the ground lug on the back of the pot is substantial, and is well suited for heavier ground wires like those found in some Gibson guitars, as well as any other ground connections you need to make.\u003c\/p\u003e\n\u003cp\u003eSo put the soldering iron away, and stop breathing those fumes. And don't even think about paying a tech. Our CORE pots will have your project completed in half the time or less!\u003c\/p\u003e","brand":"ToneShaper","offers":[{"title":"Default Title","offer_id":43072507674869,"sku":"TS-CORE-2587","price":14.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ts-core-2587_c_-toneshaper-core-pot-250k-audio-short-solid-shaft-2000.jpg?v=1660681774"},{"product_id":"toneshapers-core-pot-500k-audio-short-solid-shaft","title":"ToneShaper CORE Pot, 500K Audio, Short, Solid Shaft","description":"\u003cul\u003e\n\u003cli\u003e500k Audio Taper (Logarithmic)\u003c\/li\u003e\n\u003cli\u003eSolid-Shaft (Setscrew Knobs)\u003c\/li\u003e\n\u003cli\u003e.250\" Shaft Diameter\u003c\/li\u003e\n\u003cli\u003e3\/8-32 UTS Bushing Thread\u003c\/li\u003e\n\u003cli\u003e.250\" Bushing Length (Mount to Pickguard or Control Plate)\u003c\/li\u003e\n\u003cli\u003eLow Torque (Dimpled Back - Turns Easily)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur CORE pots are the only pots of their type. Based on our conventional top-quality CTS pots, we've made our CORE pots solder-free. Simply insert a wire into the slot and tighten with the included screwdriver. Voilà! Connection made.\u003c\/p\u003e\n\u003cp\u003eThis allows the pot to be used in any wiring scheme where a conventional pot would be used. The screw-down terminal block that holds the wires makes for a secure connection that is tonally identical to soldered pots (believe us when we say that the electrons are just as happy to flow across a mechanical connection as a soldered one).\u003c\/p\u003e\n\u003cp\u003eYou'll have our CORE pots installed and connected in minutes instead of hours, and you'll never again have that messy solder all over the back of your pots. Use them over and over!\u003c\/p\u003e\n\u003cp\u003eAnd check out our full complement of accessory items for use with these pots, including tremolo claws, jacks, tone capacitors, tunable treble bleed networks, and wired ground lugs. All have stranded leads pre-attached to make your project truly solder free!\u003c\/p\u003e\n\u003cp\u003eThe green terminal block is designed for stranded wire rather than solid wire, so thick or stiff capacitor legs, treble bleed networks and so forth are not suitable (did we mention we have a full line of accessories?)\u003c\/p\u003e\n\u003cp\u003eOn the other hand, the ground lug on the back of the pot is substantial, and is well suited for heavier ground wires like those found in some Gibson guitars, as well as any other ground connections you need to make.\u003c\/p\u003e\n\u003cp\u003eSo put the soldering iron away, and stop breathing those fumes. And don't even think about paying a tech. Our CORE pots will have your project completed in half the time or less!\u003c\/p\u003e","brand":"ToneShaper","offers":[{"title":"Default Title","offer_id":43072507805941,"sku":"TS-CORE-3929","price":14.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7868\/1077\/products\/ts-core-3929_c_-toneshaper-core-pot-500k-audio-short-solid-shaft-2000.jpg?v=1660682277"}],"url":"https:\/\/toneshapers.com\/en-sk\/collections\/guitar-potentiometers-pots.oembed","provider":"ToneShapers","version":"1.0","type":"link"}